3D Vacuum Coating System DECOLINE II - Concept
Introduction | Features | Application | Concept | Literature
Basic Concept of DECOLINE II 3D Vacuum Coating System
The different spray coating modules and the vacuum sputtering module of the DECOLINE II are interlinked by an innovative flexible inline concept. The DECOLINE II distinguishes itself from the traditional batch processes and satisfies with its inline concept all the prerequisites to revolutionize the existing production of 3D parts. By using high-quality layers the decorative coatings as well as and functional coatings are significantly improved.
Base Coat Lacquering System (Optional)
- UV-base lacquering system
- Solvent allowance up to 50 %
- Recycling of lacquering material possible
- Significant cost reduction by most efficient material consumption
3D Coating
- Sputtering process
- Cycle time per carrier: down to 6 seconds
- Up to 18 parts on one carrier
- Part rotation during sputtering process
- Equipped with two cathodes
- Target materials e.g.: Al, Cu, Cr, Zr, CuAl, Ag, Au, Stainless Steel
- Perfect layer uniformity and high deposition rates, even on complex 3-dimensional substrate shapes
- Reliable and clean sputtering process
- Highest coating quality, high uptime and no environmental impact
Top Coat Lacquering System
- UV-base lacquering system
- Clear lacquer application
- Colored lacquer application
- Solvent allowance up to 50 %
- Recycling of lacquering material possible
- Significant cost reduction by most efficient material consumption
DECOLINE II automates the production process while considerably reducing costs, logistical efforts as well as the personnel intensity and therefore yields a return on investment in a very short period of time.

