Plasma-enhanced CVD (PECVD)

GENERIS PECVD – Production System


SINGULUS TECHNOLOGIES has delivered more than 8,500 vacuum thin film deposition machines since its foundation in 1995. Their applications comprise standardized sputtering systems to specific ultrahigh vacuum machines applying thin layers from angstrom to micrometer range for the semiconductor industry as well as for photovoltaics, data storage, decorative coatings and other applications. Plasma enhanced chemical vapor deposition (PECVD) has been utilized and continuously developed at SINGULUS TECHNOLOGIES for close to 20 years ranging from plasma source design to process and layer stack development for protective, optical and electronically active applications.

Since 2007, SINGULUS TECHNOLOGIES has focused its PECVD development program to high-rate inline deposition of passivation, anti-reflective and semiconducting layers to enhance the efficiency of crystalline silicon photovoltaic cells. SINGULUS TECHNOLOGIES employs inductively coupled plasma (ICP) sources for inline PECVD coating applications. ICP is a method that offers a high electron and activation density in conjunction with low ion energy, which allows very high deposition rates over a large width and extraordinary layer quality with wide process windows at low substrate damage.

Therefore, ICP plasma sources are ideally suitable for high-rate and low-damage mass production of electronic devices like solar cells. SINGULUS TECHNOLOGIES has developed a new, large-scale linear plasma source based on this technology. SINGULUS TECHNOLOGIES has already delivered a system for the deposition of functional layers for the production of gallium arsenide (GaAs) photovoltaic cells.

The PECVD coating step is a crucial quality factor for GaAs solar cells that are renowned to achieve very high efficiency in excess of 35 % in multi-junction setup and that are used in space applications.

GENERIS PECVD – System for GaAs solar cells

GENERIS PECVD system for TopCon and HJT

The newly developed GENERIS PECVD system is a modular horizontal inline tool designed for the special needs in mass production of state-of-the-art crystalline silicon solar cells with highest efficiencies, such as passivated emitter and rear cells (PERC/ PERT) and cells with passivated contacts (e.g. TOPCon, POLO). PERC solar cells are coated on both sides with dielectric passivation layers. Rear side passivation is achieved by deposition of a thin aluminum oxide (AlOx) layer capped by hydrogen rich silicon nitride (SiNx:H). On the front side, a layer of SiNx:H serves as both, passivation and anti-reflective coating (ARC). The system is ideally suited for cost effective mass production with high throughput, high uptime, short cleaning interruptions and maximum utilization of raw materials. The substrate temperature is fully controlled during the whole process, which enables optimum layer performance at temperatures in the order of 350 °C for PERC cells. The thermal properties can be adapted in a wide range for other layer stacks and applications. SINGULUS TECHNOLOGIES carriers allow single side deposition with close to zero wraparound.

The GENERIS PECVD allows for deposition on both sides of the wafer without vacuum interruption. The application of both processes AlOx and SiNx is realized in one common system with help of a gas separation chamber.

More product details: